Lateral/ Single Shelf Low Credenza • ONCSLFBK6020 • INSTRUCTIONS
STEP 1 : Insert 2 Wood Cam Pins(M) into Back Panel(LS-A).
Place Back Panel(LS-A) on a flat surface with pins facing up.
STEP 3 : Insert 6 Wood Cam Pins(M) into the Left Side(LS-F)
and Right Side(LS-G).
M
M
LS-F
M
M
STEP 5 : Pull out each drawer on the Lateral(PED-L) and find the black tabs at the end of the suspension. Lift one side up and press
the other side down simultaneously and pull the drawer out. This will unlock the drawer and release it. Repeat this for all drawers.
Any problems or questions call Regency Office Furniture at 1-866-816-9822
CARTONS: TT6020, PLF3020, PSC3020
M
LS-A
M
M
M
M
LS-G
M
M
M
STEP 2 : Attach Base Panel(LS-B) and Top Panel(LS-C) to
Back Panel(LS-A) by inserting and locking cams (Figure 1).
Note: The cam locks on the Base Panel face away from Back
Panel and the cam locks on the Top Panel face the interior.
STEP 4 : Attach the Left Side(LS-F) and Right Side(LS-G)
by inserting and locking cams(Figure 1).
M
LS-F
M
LS-C
LS-A
Lateral/ Single Shelf
Low Credenza
Page 3
LS-B
LS-G