Obtaining An Ip Address - Q-See QT Series Remote Monitoring Setup Manual

OBTAINING AN IP ADDRESS

Each device on a network - both a LAN or the Internet - has a specific IP address. This
address is what allows different devices on the network to communicate with each other. Your
QT-series DVR displays its IP address in the Network Setup window.
STEP 1. Click on the Menu icon in the
tool bar on the DVR's screen.
STEP 2. Click on the Setup icon in the
Main Menu
STEP 3. Click on the Network icon in
the Setup Menu
STEP 4. Ensure that the box labeled
"Obtain IP Address Automatically" is
checked.
If it is not, please put a checkmark in
the box, click on Apply and then exit
the window. Reopen the window to
see the updated IP address.
STEP 5. Write down the:
1. DVR's IP Address
2. Subnet Mask, and
3. Gateway (your Router's address)
STEP 6. Exit Menu
PICTURE 1-1
PICTURE 1-2
PICTURE 1-3
NETWORK NETWORK
Network Network Substream Substream Email Email
HTTP Port HTTP Port
Server Port Server Port
Obtain an IP address automatically Obtain an IP address automatically
IP Address IP Address
Subnet Mask Subnet Mask
Gateway Gateway
Preferred DNS Server Preferred DNS Server
Alternate DNS Server Alternate DNS Server
PPPoE PPPoE
User Name User Name
Password Password
PICTURE 1-4
Other Settings Other Settings
80 80
6036 6036
192 . 168 . 001 . 100 192 . 168 . 001 . 100
255 . 255 . 255 . 000 255 . 255 . 255 . 000
192 . 168 . 001 . 001 192 . 168 . 001 . 001
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000 000 . 000 . 000 . 000
Test Test
Default Default Apply Apply Exit Exit
1
2
3
7