Warnings And Important Information; Safety And Regulatory Information - Rinnai Enduro XL SP250B Operation & Installation Manual

Low profile roof mounted solar hot water systems
Hide thumbs Also See for Enduro XL SP250B:
Table of Contents

Advertisement

WARNINGS AND IMPORTANT INFORMATION

WARNINGS AND IMPORTANT INFORMATION

SAFETY AND REGULATORY INFORMATION

DO NOT operate this system before reading the manufacturers instructions.
This appliance must be installed, commissioned and serviced by an authorised person in accordance
WARNING
with all applicable local rules and regulations.
Access covers of water heating system components will expose 240V wiring and MUST only be removed
by an authorised person.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
For continued safety of this appliance it must be installed, operated and maintained in accordance with
the manufacturer's instructions.
Children should be supervised to ensure they DO NOT play with the appliance.
Any power leads from the water heater system components MUST be plugged into an external
weatherproof electrical outlet. If the power supply cord of any water heating components is damaged, it
MUST BE replaced by an authorised person in order to avoid a hazard, using genuine replacement parts
available from Rinnai. Take care not to touch the power plugs with wet hands.
Care should be taken not to touch the pipe work as it may be HOT!
The pipes between the solar collectors and storage cylinder MUST BE copper or an equivalent metallic
material specified by Rinnai. Plastic pipe is NOT suited to the water temperatures and pressures that
may occur in the system.
DO NOT place articles on or against this appliance.
DO NOT store chemicals or flammable materials near this appliance.
DO NOT operate with collectors or covers removed from this appliance.
NEVER use a flammable spray such as hair spray, lacquer, paint, etc near this unit as this may cause a
fire.
This appliance must be installed by a person licensed with the Victorian Building Authority.
Only a licensed person will have insurance protecting their workmanship.
So make sure you use a licensed person to install this appliance and ask for your Compliance Certificate.
For Further information contact the Victorian Building Authority on 1300 815 127.
Rinnai
NOTICE TO VICTORIAN CONSUMERS
4
Low Profile Roof Mounted OIM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S20S26

Table of Contents