Specifications; General; Solar Collectors - Rinnai Enduro XL SP250B Operation & Installation Manual

SPECIFICATIONS

GENERAL

Flow and return pipework
PTR valve setting
Rating of PTR Valve supplied
Expansion Control Valve (ECV) setting
(supplied by installer if required)
Max supply pressure with ECV
Max supply pressure without ECV
Pressure limiting valve rating
(supplied by installer if required)

SOLAR COLLECTORS

Type
Waterways
Absorber
Selective Surface
Maximum Operating Pressure
Casing Material
Overall Dimensions
(L x W x H) (mm)
Weight empty (kg)
Water volume (litres)
Number of risers
Potential Solar Output at
PTR relief conditions (kW)
Frost Protection
Rinnai
The Rinnai solar hot water warranty booklet specifies the locations and
conditions that apply for flat plate collectors to be warranted against frost
damage.
In locations where the warranty booklet specifies that frost valves must be
used, they must be fitted for warranty to apply. Failure to fit frost valves will
void any warranty against frost damage.
For full warranty terms and conditions refer to the Rinnai solar hot water
warranty booklet. This booklet is available from www.rinnai.com.au.
10
½"
850 kPa
10 kW
700 kPa
500 kPa
700 kPa
500 kPa
Enduro XL
SP250B
Flat plate
Copper
Aluminium
High Performance
1000 kPa
Aluminium
1960 x 1290 x 80
48
2�4
10
1�4
Low Profile Roof Mounted OIM