No Sound Is Produced From Subwoofer; Dts Sound Is Not Output; Dts Neural:x Mode Cannot Be Selected; Dolby Surround Mode Cannot Be Selected - Denon AVR-X6700H Owner's Manual

Contents Connections

No sound is produced from subwoofer.

Check the subwoofer connections.
0
Turn on the subwoofer's power.
0
Set "Speaker Config." - "Subwoofer" in the menu to "1 spkr" or "2 spkrs". (v p. 247)
0
When "Speaker Config." - "Front" in the menu is set to "Large", depending on the input signal and the sound mode, no sound may be output from the
0
subwoofer. (v p. 247)
When no subwoofer audio signal (LFE) is included in the input signals, no sound may be output from the subwoofer. (v p. 256)
0
You can make the subwoofer always output sound by setting the "Subwoofer Mode" to "LFE+Main". (v p. 256)
0

DTS sound is not output.

Check that the digital audio output setting on the connected device is set to "DTS".
0
Dolby Atmos, Dolby TrueHD, DTS-HD, Dolby Digital Plus audio is not output.
Make HDMI connections. (v p. 86)
0
Check the digital audio output setting on the connected device. On some devices, "PCM" is set by default.
0

DTS Neural:X mode cannot be selected.

DTS Neural:X cannot be selected when using the headphones.
0

Dolby Surround mode cannot be selected.

Dolby Surround cannot be selected when using the headphones.
0
IMAX DTS:X cannot be selected.
IMAX DTS:X and IMAX DTS cannot be selected but DTS:X and DTS can be selected, when the headphones are used.
0
Sound modes other than "Stereo" or "Direct" cannot be selected.
Only "Stereo" or "Direct" can be selected for the sound mode if Headphone:X signals are input.
0
Front panel Display
Playback Settings
301
Rear panel
Tips
Remote Index
Appendix