Sound Modes And Channel Output - Denon AVR-A110 Service Manual

Sound mode table

Sound modes and channel output

○ This indicates the audio output channels or surround parameters that can be set.
◎ This indicates the audio output channels. The output channels depend on the settings of "Speaker Config.".
Sound mode
Front
Center
L/R
Direct/Pure Direct (2-channel) ○
Direct/Pure Direct (Multi-channel) ○ ◎
DSD Direct (2-channel) ○
DSD Direct (Multi-channel) ○ ◎
Stereo ○
Dolby Atmos ○ ◎
Dolby TrueHD ○ ◎
Dolby Digital Plus ○ ◎
Dolby Digital ○ ◎
Dolby Surround ※ 1 ○ ◎
IMAX DTS:X ○ ◎
IMAX DTS ○ ◎
DTS:X ○ ◎
DTS-HD ○ ◎
DTS Express ○ ◎
DTS 96/24 ○ ◎
DTS Surround ○ ◎
DTS Neural:X ※ 3 ○ ◎
DTS Virtual:X ※ 4 ○ ◎
Auro-3D ○ ◎
Auro-2D Surround ○ ◎
Multi Ch In ○ ◎
MPEG-2 AAC (JAPAN Model Only) ○ ◎
MPEG-4 AAC (JAPAN Model Only) ○ ◎
MPEG-H (Europe, China Model Only) ○ ◎
Multi Ch Stereo ○ ◎
Rock Arena ○ ◎
Jazz Club ○ ◎
Mono Movie ○ ◎
Video Game ○ ◎
Matrix ○ ◎
Virtual ○
※ 1 The applicable sound mode includes "Dolby Surround" and sound modes that have "+Dolby Surround" in the sound mode name.
※ 3 The applicable sound mode includes "DTS Neural:X" and sound modes that have "+Neural:X" in the sound mode name.
※ 4 The applicable sound mode includes "DTS Virtual:X" and sound modes that have "+Virtual:X" in the sound mode name.
※ 5 Audio is output when "Subwoofer Mode" in the menu is set to "LFE+Main".
※ 6 A signal for each channel contained in an input signal is output as audio.
※ 7 Audio is not output when the "Speaker Virtualizer" in the menu is set to "On" and "Speaker Config." - "Surr. Back" in the menu is set to "1 spkr".
※ 8 Audio is not output when the "Speaker Virtualizer" is set to "On".
※ 9 When "Speaker Config." - "Surr. Back" is set to "2 spkrs", "Speaker Config." - "Center" is set to "Large" or "Small", and sound mode is set to "IMAX DTS", surround audio is output from the surround back speaker.
Audio is not output from the surround speaker.
※ 10 For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup in place of Surround Height speakers.
※ 11 For the best Auro-3D experience Front Height and Surround Height speakers are recommended, however you may substitute Dolby Atmos Enabled speakers.
※ 12 Audio is output from the speakers specified in the "Surround Parameter" – "Speaker Select" settings.
Surround
Surround Front Wide Front Height Top Front L/ Top Middle
Back
L/R L/R L/R R
L/R
◎ ◎※ 6 ◎※ 6 ◎※ 6 ◎※ 6 ◎※ 6
◎
◎ ◎ ◎ ◎ ◎
◎ ◎※ 6
◎ ◎※ 6
◎
◎ ◎※ 7 ◎※ 8 ◎ ◎
◎ ◎ ◎ ◎ ◎
◎※ 9 ◎※ 9
◎ ◎ ◎ ◎ ◎
◎ ◎※ 6 ◎※ 6
◎ ◎
◎ ◎
◎ ◎
◎ ◎ ◎ ◎ ◎
◎ ◎
◎ ◎ ◎
◎ ◎
◎ ◎※ 6
◎
◎
◎ ◎ ◎ ◎ ◎
◎ ◎ ◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12
◎ ◎ ◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12
◎ ◎ ◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12
◎ ◎ ◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12
◎ ◎ ◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12
◎ ◎ ◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12
Channel output
Surround
Top Rear Rear Height Center Top Sur-
Height
L/R L/R L/R Height round
L/R
◎※ 6 ◎※ 6 ◎※ 6 ◎※ 6 ◎※ 6
◎ ◎ ◎
◎ ◎ ◎
◎ ◎ ◎ ◎ ◎ ◎
◎ ◎ ◎ ◎ ◎ ◎
◎ ◎ ◎ ◎ ◎ ◎
◎※ 10 ◎ ◎ ◎
◎ ◎ ◎ ◎ ◎ ◎
◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12
◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12
◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12
◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12
◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12
◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12 ◎※ 12
7
Front Surround Back
Dolby Dolby Dolby
Atmos Atmos Atmos Subwoofer
Enabled Enabled Enabled
L/R L/R L/R
◎※ 5
◎※ 6 ◎※ 6 ◎※ 6 ◎
◎※ 5
◎
◎
◎ ◎ ◎ ◎
◎
◎
◎
◎ ◎ ◎ ◎
◎ ◎ ◎ ◎
◎
◎ ◎ ◎ ◎
◎
◎
◎
◎
◎ ◎ ◎ ◎
◎
◎※ 11 ◎※ 11 ◎※ 11 ◎
◎
◎
◎
◎
◎ ◎ ◎ ◎
◎※ 12 ◎※ 12 ◎※ 12 ◎
◎※ 12 ◎※ 12 ◎※ 12 ◎
◎※ 12 ◎※ 12 ◎※ 12 ◎
◎※ 12 ◎※ 12 ◎※ 12 ◎
◎※ 12 ◎※ 12 ◎※ 12 ◎
◎※ 12 ◎※ 12 ◎※ 12 ◎
◎