Adjusting The Volume; Turning Off The Sound Temporarily; Playback A Dvd Player/Blu-Ray Disc Player - Denon AVR-X6700H Owner's Manual

Contents Connections

Adjusting the volume

1
Use VOLUME df to adjust the volume.
0 The variable range differs according to the input signal and channel level setting.
0 You can also adjust the master volume by turning MASTER VOLUME on the main
unit.

Turning off the sound temporarily

(Muting)
1
Press MUTE :.
MUTE indicator on the display flashes.
0
: appears on the TV screen.
0
0 The sound is reduced to the level set at "Mute Level" in the menu. (v p. 200)
0 To cancel mute, either adjust the sound volume or press MUTE : again.
0 If : is displayed on the TV screen for more than 5 minutes when the "Screen
Saver" is set to "On", the : symbol moves randomly over the TV screen.
(v p. 218) (This feature will be supported via firmware update.)
Front panel Display
Playback Settings
Playback a DVD player/Blu-ray Disc
player
The following describes the procedure for playing DVD player/Blu-ray Disc
player.
1
Prepare for playback.
A Turn on the power of the TV, subwoofer and player.
B Change the TV input to the input of this unit.
2
Press POWER X to turn on power to the unit.
3
Press DVD or Blu-ray to switch an input source for a
player used for playback.
4
Play the DVD player or Blu-ray Disc player.
o Surround playback (v p. 150)
101
Rear panel
Tips
Remote Index
Appendix