Alcatel OmniSwitch 7700 Hardware User's Manual page 144

Removing and Adding Modules
4
Once the module is firmly seated, secure the module to the chassis by tightening the two captive
screws. Be sure not to overtighten the captive screws. If you use a screwdriver, the torque used to tighten
the screws must not exceed 2.3 inch pounds.
page 5-28
1
N I
2
O K
1
O K
2
O K
1
O K
2
OmniSwitch 7700/7800 Hardware Users Guide
Network Interface (NI) Modules
April 2005