Alcatel OmniSwitch 7700 Hardware User's Manual page 124

Hide thumbs Also See for OmniSwitch 7700:
Table of Contents

Advertisement

ENI Modules
OS7-ENI-P24 Technical Specifications
Number of ports
Connector type
Standards supported
Data rate
Maximum frame size
MAC addresses supported
Connections supported
Cables supported
Maximum cable distance
Current draw
Power consumption
Note. See
Chapter 3, "Installing and Managing Power over Ethernet (PoE),"
configuring Power over Ethernet on the OS7-ENI-P24.
page 5-8
24 twisted-pair, individually configurable as 10BaseT or 100BaseTX.
RJ-45
IEEE 802.3u, 802.3af (DTE Power via MDI MIB); IAB RFCs 826,
894;
10 or 100 Mbps (full or half duplex)
1553 bytes
32000 per Network Interface (NI) module
10BaseT or 100BaseTX IP phones, Bluetooth Access Points, Internet
cameras, and other devices requiring power over Ethernet
10BaseT: unshielded twisted-pair (UTP)
100BaseTX: unshielded twisted-pair (UTP), Category 5, EIA/TIA 568
or shielded twisted-pair (STP), Category 5, 100 ohm
100 meters
1.83 amps at 24 volts
44 watts (approximate)
OmniSwitch 7700/7800 Hardware Users Guide
Network Interface (NI) Modules
for information on
April 2005

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 7800

Table of Contents