Table of Contents
Advertisement
5. Push
6. Push
W
7. When you are satisfied with the size and position of the Spot Box, push
next Spot Box.
8. Repeat for each Spot Box.
9. When you are satisfied with the size and position of each Spot Box, push
menu.
Spot Markers
Use fixed-temperature spot markers to highlight a region on the display before you save an image.
To set a marker:
1. Select Measurement > Markers.
2. Select the number of markers.
3. Push
shows on the display and the labels on the function buttons change to Done, Next, and Cancel.
To change the marker position on the display:
1. Push
W
2. When you are satisfied with the position of the marker, push
marker.
When the position of the marker is set, the marker symbol changes from
3. Repeat for each marker.
4. When you are satisfied with the position of each marker, push
Delta-T
Use to set the center point or a spot marker to use as a temperature reference mark.
To set a temperature reference mark:
1. Select Measurement > Markers > Delta-T.
2. Select the center point or spot marker to set as the reference mark.
and the temperature shows on the display next to the reference mark.
A delta symbol (
next to the other spot markers.
The center point can be a temperature reference mark, but it cannot have a delta symbol. It is either the
main reference mark or it is not a delta reference at all.
Find Quality Products Online at:
to select Position.
/
X
/
Y
/
Z
to move the Spot Box location on the image.
to set the number of markers and go to the Move Marker display.
/
X
/
Y
/
Z
to move the marker location on the image.
) and the temperature difference relative to the temperature of the reference mark shows
GlobalTestSupply
www.
Professional Series Thermal Imagers
to set the change and select the next
to set the change and exit the menu.
Note
.com
Menus
to set the change and select the
to set the change and exit the
to
.
sales@GlobalTestSupply.com
17
Hide quick links:
Advertisement
Table of Contents
