Fluke Professional Series User Manual page 7

• Disconnect the battery charger and move the Product or battery to a cool, non-flammable
location if the rechargeable battery becomes hot (>50 °C) during the charge period.
• Replace the rechargeable battery after 5 years of moderate use or 2 years of heavy use.
Moderate use is defined as recharged twice a week. Heavy use is defined as discharged to
cutoff and recharged daily.
• Do not short the battery terminals together.
• Do not keep cells or batteries in a container where the terminals can be shorted.
• Do not use the Product for medical reasons. The Product is intended for equipment evaluation
only and should never be used in diagnostics, treatment, or any other capacity where the
Product would come in contact with a patient.
Storage and/or continual operation of the Imager in extreme ambient temperature conditions
can result in temporary interruption of operation. If this occurs, let the Imager stabilize (cool
down or warm up) before you resume operation.
Table 1 is a list of symbols that can be used on the Imager or in this manual.
Symbol

W
*
15V DC
"



™
MEMORY
HDMI
P
)


Find Quality Products Online at:
Table 1. Symbols
Consult user documentation.
WARNING. RISK OF DANGER.
WARNING. LASER RADIATION. Risk of eye damage.
Center positive power port.
Connected to ac power. Battery removed.
Battery.
Battery status. Battery charging when animated.
On/Off
Universal Serial Bus (USB) connection.
Memory card slot.
High-Definition Multimedia Interface (HDMI) connection.
Conforms to European Union directives.
Certified by CSA Group to North American safety standards.
Conforms to relevant Australian Safety and EMC standards.
Conforms to relevant South Korean EMC standards.
GlobalTestSupply
www.
Professional Series Thermal Imagers
W Caution
Description
.com
Safety Information
3
sales@GlobalTestSupply.com