Remove Nim-Ssd Or Nim-Hdd - Cisco 4000 Series Hardware Installation Manual

Remove and Replace Cisco NIM-SSD or NIM-HDD

Remove NIM-SSD or NIM-HDD

To remove the module from the router:
Slip on the ESD-preventive wrist strap that was included in the accessory kit. Loosen the screw fasteners
Step 1
(11) located on the SSD slots on the right of the input/output (I/O) side of the Cisco 4451-X ISR.
(Figure
Figure 5-19
2
1
Using a Phillips screwdriver, loosen the captive screws on either side as shown in
Step 2
Figure 5-20
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
5-24
5-19).
Remove the NIM-SSD or NIM-HDD from the Router
Captive screws holding the NIM-SSD to the
router
Remove the NIM-SSD or NIM-HDD from the Router
Chapter 5
L
L
1
Install and Upgrade Internal Modules and FRUs
1
Figure 5-19.
1
1
OL-32185-02