Table of Contents
Advertisement
CLEARANCES REQUIRED
WHEN FITTING THE GAS HOB
WITHOUT A COOKER HOOD ABOVE
700 mm
400 mm
Installation
IMPORTANT
This hob must be installed by a competent person to the relevant Gas
Standards.
Any gas installation must be carried out by a registered competent
person.
Please, ensure that, once the hob is installed, it is easily accessible for the engineer in
the event of a breakdown.
The manufacturer will not accept liability, should the above instructions or any of the
other safety instructions incorporated in this instruction booklet be ignored.
On the end of the shaft, which includes the G 1/2" threaded elbow, adjustment is fixed so
that the washer is fitted between the components as shown in the diagram. Screw the
parts together without using excessive force.
16
700 mm
400 mm
CLEARANCES REQUIRED
WHEN FITTING THE GAS HOB
WITH A COOKER HOOD ABOVE
400 mm
400 mm
Advertisement
Table of Contents
