Product Operation - Royal Sovereign RBC-ED250 Owner's Manual

PRODUCT OPERATION

1. Attach the power cable to the back of the machine, plug into a three prong outlet, and turn the switch on.
The unit will conduct an automatic self-diagnostics to ensure accurate counts.
•
• After three seconds of the counting wheels spinning, the screen will display "0".
• If there is a problem, the preset display will show an error code. (See ERROR CODE DISPLAY AND
SOLUTIONS – LOCATED ON PAGE 9.)
2. Before counting, select counting settings that are related to your counting needs:
• Auto and Manual Start Modes: The machine is preset to automatically start counting bills once placed
into the hopper. To change to manual start mode, press the "M/A" button, insert the bills into the
hopper, and press the "ENTER/START" button. Press the "M/A" button again to return to auto mode.
Add Mode: The Add mode displays the cumulative total of all bills counted. To turn the ADD mode on,
•
press the "ADD" button.
• Batch Mode: The machine is preset to common counting mode. To count bills in batches, press the
"BATCH" button. Batching is preset to 100 bills. To change the batch amount, use the keypad to enter a
batch number between 1 and 999. Press "ENTER/START" to save the setting. Press the "BATCH" button
again to clear.
• Counterfeit Detection: To turn on/off counterfeit detection methods, press the "CF" button. If a
suspicious bill is found, the machine will stop counting to allow removal and will display the error code
on the display. To resume counting, simply press "ENTER/START".
PRESET setting operation: Press and hold the "CF" button for 2 seconds to enter the preset setting
mode. "MG" would be flickering on the screen and it would display "OFF" or "ON" at the BATCH
window, at the meanwhile press the "▲" button to turn on the magnetic counterfeit detection then
it will display "ON" at the BATCH window and when you press the "▼" button to turn off the
magnetic counterfeit detection then it will display "OFF". Press the "CF" button for once, "UV" (UV
counterfeit detection) would be flickering on the screen; repeatedly pressing the button for once,
then it would be turned to "IR" (Infrared counterfeit detection) and "DD" (dimensional detection) in
order. To turn on or turn off the detection, repeat the above steps. After the setting, press the
"ENTER/START" button to save and exit the mode.
6