Royal Sovereign RBC-ED250 Owner's Manual page 8

PRODUCT OPERATION
• Value Counting:
The machine will total the number of bills by denomination and total value by denomination as well as provide a
grand total. Each denomination must be counted separately. To operate press the "ADD" button. Then on the
keypad press the denomination to be counted ($1 - $100). After the denomination is counted, press the next
denomination to be counted and continue until all denominations needed to be counted are complete. Then
press and hold the "REPORT" button to view the total number of bills and values of each denomination along
with a grand total.
Menu Setting:
•
Press and hold the "CLEAR/MENU" button for 2 seconds, you will see: 1. SPEED SET 2. LEVEL SET 3. WARN
COUNT SET 4. DATE&TIME SET 5. BEEP SET 6.PRINTER SET these 6 options interface, press the "▼" or "▲"
buttons to select the option you need, then press the "ENTER/START" button.
7
(Continued)
Single Denomination Counting-
Select denomination to be counted from the Numeric/Denomination keypad
Place bills in hopper.
Total number of bills and denomination value will show on display screen after bills are counted.
Multi-Denomination Value Counting-
Press the "ADD" button.
Select denomination to be counted from the Numeric/Denomination keypad
Place bills in hopper.
Select next denomination and repeat process above.
After all denominations are have been counted press and hold the "REPORT" button and the number
of bills and value for each denomination along with a grand total will show on the display screen.
1. SPEED SET - Press the "ENTER/START" button to enter the setting, there are three speeds: SPEED
1,900pcs/min, SPEED2, 1,200pcs/min, SPEED3, 1,500pcs/min. press the "▼ " or "▲" buttons to
select the speed you need, then press the "ENTER/START" button to quit.
2. LEVEL SET - Press the "ENTER/START" button to enter the setting, it will show 1. UV LEVEL 2. MG
LEVEL 3. DD LEVEL 4. DOUBLE LEVEL. press the "▼" or "▲" buttons to select the item you need,
then press the "ENTER/START" button and enter the setting. Each sensitivity has 5 levels: (1.low,
2-4.middle, and 5.high), press the button 4 or 6 to minus or add one sensitivity level,
then press then press the "ENTER/START" button to quit.
3. WARN COUNT SET - Press the "ENTER/START" button to enter the setting, press the "▼" or
"▲" buttons to select the item you need (WARN COUNT/ON means the counterfeit note is included
in the amount; WARN COUNT/OFF means the total amount doesn't include the counterfeit notes),
then press the "ENTER/START" button to quit.