Product Operation - Royal Sovereign RBC-ED200 Owner's Manual

PRODUCT OPERATION

1. Attach the power cable to the back of the machine, plug into a three-prong outlet, and turn the switch on.
• The unit will conduct an automatic self-diagnostics to ensure accurate counts.
• After five seconds of the counting wheels spinning, the screen will display "0".
• If there is a problem, the preset display will show an error code. (See ERROR CODE DISPLAY
AND SOLUTIONS – LOCATED ON PAGE 8.)
2. Before counting, select counting settings that are related to your counting needs:
• Add Mode: The ADD mode displays the cumulative total of all bills counted. To turn the ADD
mode on, press the "ADD" button.
Counterfeit Detection: To turn on the counterfeit detection methods (UV,MG,IR, and DD), press
•
the "CF" button. To turn off the counterfeit detection methods, select the "CF" button until the
indicator lights turn off.
o
o
o
UV Counterfeit Detection: Counterfeit bills often used white or bleached paper, which
will glow under ultraviolet light. When the UV detector finds a suspicious bill, the
machine will stop counting to allow removal and will display the error code on the
display. To resume counting, simply press "START".
MG Counterfeit Detection: If the magnetic detector does not find the presence of
magnetic ink that are standard in authentic bills, the machine will stop counting to
allow removal and will display the error code on the display. To resume counting,
simply press "START".
IR and DD Counterfeit Detection: The dimension detector measures the width of the
center of each bill by using infrared light. If the detector finds an odd sized bill, the
machine will stop counting to allow removal of the bill and display the error code on
the preset display. To resume counting, simply press "START".
6