Pre-Operation Checks; Engine Cover Removal/Installation - Honda BF200D Manual

42ZVL600.book 57 ページ ２０１８年７月１９日 木曜日 午前９時６分
BF200D/BF225D/BF250D is 4-stroke,
water cooled outboard motor which
uses unleaded regular gasoline for fuel.
It also requires the engine oil. Check
the following before operating the
outboard motor.
CAUTION
Perform the following
pre-operation checks with the
engine stopped.
Before each use, look around and
underneath the engine for signs of oil
or gasoline leaks.

6. PRE-OPERATION CHECKS

Engine Cover Removal/Installation

Front
ENGINE COVER LATCH
Side
ENGINE COVER LATCH (each side)
1. Pull all the engine cover latches.
2. Remove the engine cover by taking
it up.
<Installation>
COVER SIDE COVER LOCKS
Side
MAIN BODY SIDE
1. Place the engine cover on the main
body.
2. Slide the engine cover so that the
cover lock on the cover is mated
with the lock in the main body.
57