Honda BF200D Manual page 127

42ZVL600.book 127 ページ ２０１８年７月１９日 木曜日 午前９時６分
WATER
SEPARATOR
WATER
SEPARATOR
BRACKET
SUSPENSION
STRAP
<Replacement>
1. Remove the engine cover (see page
57).
2. Disconnect the 2-pin coupler (blue).
FUEL HOSES
HOSE CLIPS
2 PIN COUPLER
(BLUE)
3. Remove the suspension strap from
the fuel filter with water separator
bracket, then remove the
suspension strap from the fuel filter
with water separator.
4. Bind the two fuel tubes with the
tube clips to prevent the fuel
leakage, disconnect the fuel tubes.
MAINTENANCE
WATER SEPARATOR CUP
O-RING (Replace)
SCREWS
5. Remove the three screws holding the fuel
filter with water separator, delete the water
or deposit from the inside of the cup.
6. Thoroughly clean the cup, and
replace with a new fuel filter.
7. Reassemble the water separator in the
reverse order of removal. Use a new O-ring.
TIGHTENING TORQUE:
3.4 N·m (0.34 kgf·m, 2.5 lbs·ft)
127