Lnb Power Supply Connections; Rf Connections - Triax CSE 2800 Assembly Instruction Manual

6.3 lnb p
• Connect the DC cable
tacts
6.4 rf
C o n n e C t i o n s
To comply with the current EMC regulations, it is necessary to connect the lines
leading in and out of the head-end station using F terminals.
Note:
The F terminal at the rear panel are intended to use for RF input and RF output.
The following connection example shows a possible connection scheme.
• Connect the SAT IF cables coming from the LNBs to the relevant F terminals
(fig. 23,
1
ow e r s u p p ly C o n n e C t i o n s
(12V/800 mA total).
^
).
4
2
of a retrofitted input distributor to one of the con-
%
3 7 4 5
Fig. 22
- 19 -
%
^
4 6
CSE 2800