Wall Mounting - Triax CSE 2800 Assembly Instruction Manual

w
a l l m o u n t i n G
• Align the studs
housing and snap it into place. The distance between the back side of the
housing and the back edge of the mounting bracket is approx. 75 mm.
• Screw in the 6 thread-forming countersunk screws
• Attach the mounting bracket to the other side of the housing in the same way.
• Insert wall plugs suitable for the wall properties into the wall so that they
correspond to the dimensions in the following illustration (fig. 14,
• Mount the head-end station and screw it tightly.
on the mounting bracket
1
!
!
1
1
2
1
1
Fig. 13
465 mm
Fig. 14
- 14 -
4
3
4
with the hole matrix on the
3
that were supplied.
2
!
!
).
!
CSE 2800