IBM SAN Volume Controller 2145-SV1 Hardware Installation Manual page 81

Table 15. Enclosure weight as FRUs are installed (continued)
Enclosure assembly
FRUs installed
Note: The following FRUs
are installed when the
enclosure is initially
shipped.
• Enclosure (01LJ607 or
01LJ112)
• Secondary expansion
modules
• PSUs
• Expansion canisters
• Fan modules
• Fan interface board
• Display assembly
• Cover
• Enclosure (01LJ607 or
01LJ112)
• Secondary expansion
modules
• Fascia (1U and 4U)
• PSUs
• Expansion canisters
• Fan modules
• Fan interface boards
• 92 2.5-inch tier 1 flash
drives
• Enclosure (01LJ607 or
01LJ112)
• Secondary expansion
modules
• Fascia
• PSUs
• Expansion canisters
• Fan modules
• Fan interface board
• 92 2.5-inch hard disk
drives
FRUs not installed
• Fascia (1U and 4U)
• Drives
• Cover
• Cover
Chapter 4. Installing an optional 5U SAS expansion enclosure 49
Approximate weight
kg
61.5
78.6
86
lb
135.4
173.3
189.6