IBM SAN Volume Controller 2145-SV1 Hardware Installation Manual page 180

Table 27. Physical specifications (continued)
Environment
Turned off (with
standby power)
Storing
Shipping
Note: Decrease the maximum system temperature by 1°C for every 175 m increase in altitude.
Preparing your environment
The following tables list the physical characteristics of a SAN Volume Controller 2145-SV1 node.
Dimensions and weight
Use the parameters that are shown in Table 28 on page 148 to ensure that space is available in a rack
capable of supporting the node.
Table 28. Dimensions and weight
Height
87 mm (3.4 in.)
Additional space requirements
Ensure that space is available in the rack for the additional space requirements around the node, as
shown in Table 29 on page 148.
Table 29. Additional space requirements
Location
Left side and right side
Back
Maximum heat output of each SAN Volume Controller 2145-SV1 node
The node dissipates the maximum heat output that is given in Table 30 on page 149.
148 SAN Volume Controller : Model 2145-SV1 Hardware Installation Guide
Temperature Altitude
5°C to 45°C 0 m to 3,050 m
(41°F to 113°F) (0 ft to 10,000 ft)
1°C to 60°C 0 m to 3,050 m
(33.8°F to (0 ft to 10,000 ft)
140.0°F)
-40°C to 60°C 0 m to 10,700 m
(-40°F to 140.0°F) (0 ft to 34,991 ft)
Width
447 mm (17.6 in)
Additional space requirements
Minimum: 50 mm (2 in.)
Minimum: 100 mm (4 in.)
If the cable-management arm is
used, allow 177 mm (7 in.)
Relative humidity
8% to 85%
5% to 80%
5% to 100%
Depth
746 mm (30.1 in)
Reason
Cooling air flow
Cable exit
Maximum dew
point
27°C (80.6°F)
29°C (84.2°F)
29°C (84.2°F)
Maximum weight
25 kg (55 lb) to 30 kg
(65 lb) depending on
configuration