Epson Stylus Pro 7400 Notice Sheet page 3

2. Open the top cover and then use a soft, clean cloth to carefully remove any dust or dirt inside the
printer. Wipe the gray part by following the directions of the arrows.
If there is a serious problem of dirt on the inside of the printer, clean it using a soft, clean cloth
dampened with mild detergent. Then, wipe the inside of the printer dry with a dry, soft cloth.
3. If the back of a printout is soiled, carefully clean the platen (the gray part) using a soft, clean cloth.
4. If some powdery paper dust is stuffed in the platen, use something like a toothpick to remove it.
Close the top cover.
5. If the outer case is dirty, clean it using a soft, clean cloth dampened with mild detergent. Keep the
ink compartment covers closed to prevent water from getting inside.
3