Problem
Decreased output.
1.
2.
3.
Severe air
1.
leakage.
(Slight air leakage
is normal,
2.
especially on
older Soda
Blasters.)
3.
4.
Follow all safety precautions whenever diagnosing or servicing the
Soda blaster. disconnect air supply before service.
SKU 65902/66742 For technical questions, please call 1-800-444-3353.
troubleshooting
Possible causes
Not enough air pressure and/
or air flow.
Loose air fittings.
Mechanism contaminated.
Cross-threaded housing
components.
Loose housing.
Damaged valve or housing.
Dirty, worn or damaged valve.
likely Solutions
1.
Check for loose connections and make
sure that air supply is providing enough air
flow (CFM) at required pressure (PSI) to
the Soda Blaster's air inlet. do not exceed
maximum air pressure.
2.
Tighten the fittings.
3.
Have qualified technician clean and lubricate
mechanism and clean the air filter.
1.
Check for incorrect alignment and uneven
gaps. If cross-threaded, disassemble and
replace damaged parts before use.
2.
Tighten housing assembly. If housing cannot
tighten properly, internal parts may be
misaligned.
3.
Replace damaged components.
4.
Clean or replace valve assembly.
Page 13