Table of Contents
Advertisement
1
Not available with spot metering.
2
Can also be selected via the flash unit.
q A/A mode selection is performed on the flash unit using custom
3
settings.
4
Can be selected using the [Flash control] item in the camera menus.
5
Available during close-up photography only.
Choice of q A and A depends on the option selected with the master
6
flash.
7
Supports the same features as remote flash units with optical AWL.
Available only in i-TTL, q A, A, GN, and M flash-control modes.
8
9
Available only in i-TTL flash control mode or when the flash is
configured to emit monitor preflashes in q A or A flash control
mode.
10
Firmware updates for the SB-910 and SB-900 can be performed from
the camera.
192
Compatible Flash Units
Advertisement
Table of Contents
