Table of Contents
Advertisement
Chapter 1 INSTALLATION
To uniformly press the packing, gradually tighten diagonally in the following order.
The proper fastening torque of the fitting bolts (M8) is 1176 to 1470 N•cm (120 to 150kgf•cm).
Bolt the earth to mountbase and scanner.
Fastening of earth cable and application of seal
Apply silicone sealant around the bolts.
30
4
2
3
1
Fig. 1-4-2-5
Fig. 1-4-2-6
4-M8 (stainless steel) bolt
Tightening torque: 120 to 150 kgf/cm
Advertisement
Table of Contents
