Components (Front); Figure 19 Operation Panel (Drive Enclosure); Table 7 Status And Meanings Of Each Led (Operation Panel (Drive Enclosure)) - Fujitsu ETERNUS AF250 S2 Basic Operation Manual

1. Component Names and LED Names
Drive Enclosures

Components (Front)

This section describes the operation panel and the drives in the front of the drive enclosure.
■
Operation Panel
An operation panel has a DE-ID display and LEDs.
Figure 19 shows the operation panel.

Figure 19 Operation Panel (Drive Enclosure)

1
2
4
1. DE-ID
The DE-ID (drive enclosure number) of the drive enclosure is displayed.
2. IDENTIFY LED
3. FAULT LED
4. POWER LED
The LEDs turn on or blink to indicate the statuses that are listed below.

Table 7 Status and Meanings of Each LED (Operation Panel (Drive Enclosure))

LED name
IDENTIFY
FAULT
POWER
Table 7 shows the status and meanings of each LED.
3
LED status
(blinks blue)
(amber)
(green)
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
Meanings
The installation location of the drive enclosure is identified ac-
cording to the instruction that is issued from ETERNUS Web GUI or
ETERNUS CLI.
The drive enclosure is in error status.
DC power is supplied to the drive enclosure.
23
P3AG-1842-06ENZ0