Table of Contents
Advertisement
Radio: You can turn on/off wireless radio. If wireless Radio is off, you cannot associate
with AP through wireless.
Mode: In this device, we support two operation modes which are AP router and WDS.
Band: You can select the wireless standards running on your network environment.
2.4G Band
2.4 GHz (802.11b/g): All 802.11b/g/n devices can connect to the router up to
54Mbps speed. You can select this option when your wireless clients are
all 802.11b/g devices.
2.4 GHz (802.11n): Only 802.11n compliant devices can connect to the
router at up to 300Mbps speed.
2.4 GHz (802.11b/g/n): All 802.11b/g/n devices can connect to the router at
their best speed.
5G Band
5 GHz (802.11a): If all of your clients are 802.11a, select this one.
5 GHz (802.11a/n): Either 802.11a or 802.11n wireless devices are in your
environment.
Enable ESSID: We support 4 multiple SSIDs in this device. Please select how many
SSIDs you would like to use in your network environment.
ESSID1~4: ESSID is the name of your wireless network. It might be a unique name to
identify this wireless device in the Wireless LAN. It is case sensitive and up to 32
printable characters. You might change the default ESSID for added security.
Auto Channel: Device will search all valid channels, then decide a most clean channel
and change to this channel if you enable this function. Depend on this function
enable or not, you will see different item below Auto Channel.
Channel: If Auto Channel is disabled, you should choose a static channel and AP will
use this channel to communicate with other clients.
Check Channel Time: If Auto Channel is enabled, you can choose a period from the
drop-down menu. Router will change to a clean channel periodically.
18
Advertisement
Table of Contents
