Wizard; Valid Wan Connection; Invalid Wan Connection - TRENDnet TEW-671BR User Manual

Dual band concurrent wireless 11n broadband router with dual cpu

Hide thumbs Also See for TEW-671BR:

Table of Contents

4. Wizard

The wizard will take you step by step to setup your internet connection with the router.

Please make sure you have a valid internet connection from your ADSL/Cable modem to the

WAN port of TEW-671BR with active LED. After the router finished scaning the WAN port, you

will see either of the following 2 screens (section 4.1 & 4.2).

When you have a valid internet connection, you can select DHCP option if that's your

connection type or Others when you have Static IP, PPPoE or PPTP type connections.

For detail internet connection settings, please refer to Section 5. And refer to section 4.3 for

Wizard's wireless setups.

The router was not able to find a valid connection, please check the cable connection and

make sure the WAN LED is on. After the verification, you can either use Rescan or choose

Manual Config to continue setting up the router manually.

Note: When pressing the Skip option, it will skip the Internet settings and go to Wireless

settings section.

For detail internet connection settings, please refer to Section 5. And refer to section 4.3 for

Wizard's wireless setups.

Table of Contents