Troubleshooting - A&D UB-1100BLE Instruction Manual

Symptom Probable Cause
Low battery
Power Blood Pressure monitor
does not internal error.
turn on.
Battery charging cable is
connected.
The cuff
Low Battery
does not
inflate.
You moved your wrist or body
The device
during measurement.
does not
measure.
Readings
are too The cuff position is not
high or too
correct.
low.
Other The value is different from
that measured at a clinic or
doctor's office.
Note: If the actions described above do not solve the problem, contact the dealer. Do not attempt to open or repair
this product, as any attempt to do so will make your warranty invalid.

Troubleshooting

Charge the battery.
Press the Reset Switch.
Remove the charging cable.
Charge the battery.
Make sure you remain still and quiet during measurement.
If you have a very weak or irregular heartbeat, the device may have difficult
in determining your blood pressure.
Sit comfortably and still.
Place your arm on a table with your palm facing upward and the wrist cuff at
the same level as your heart.
At a clinic or doctor's office apprehension may cause an elevated reading.
Home measurement reduces the effects of outside influences on blood
pressure readings, supplementing the doctor's readings.
English 27
Treatment