Hedge Trimmer - Echo HC 560 Instruction Manual

Hedge Trimmer

1. Introducing the hedgetrimmer
Technical data
Operating Voltage
Nominal Frequency
Nominal Consumption
Cutting movements
Shear length
Cutting Thickness
Weight
Noise Pressure Level: L pA
Vibration:
Class of protection: II/DIN EN 50144/VDE 0740
2. General safety instructions
Information on noise emission in accordance with
"Machine Noise Information Ordinance 3. GPSGV
and Machinery Directives: the noise pressure level
at the place of work can exceed 85 dB(A). In such
cases the operator will require noise protection (e.g.
wearing of ear protectors).
Attention: Noise protection ! Please observe the local
regulations when operating your device.
Interference suppressed in accordance with EN
55014, EN 61000-3-2:95, EN 61000-3-3:95 .
We reserve the right to make changes to the technical
specifications.The hedge trimmers are constructed in
line with the latest regulations in accordance with DIN-
EN 50144-1and DIN-EN 50144-2-15 and conform fully
to equipment safety law regulations.
General safety instruction
Usage of hedge trimmer always involves a risk of
accidents, therefore please observe the relevant
accident prevention instructions.
The machine has been constructed according to the latest
technology and in accordance with the recog-nised
technical safety regulations. Nevertheless, use of the
machine can involve risks to the user or third persons,
and can cause damage to the machine or other objects.
Attention: Using electric power tools, you must
observe following fundamental safety instructions to
protect yourself against electric shock, against
danger of injuries and danger of fire. Read all these
instructions before using the hedge trimmer and
observe them. Keep these safety instructions at a
safe place.
Use the machine in a safety conscious manner for
suitable applications
condition only and with due regard to the operating
instructions! Immediately rectify or have rectified any
faults which could adversely affect safety!
This machine may cause serious injuries. Please
read the instruction manual carefully as to the
correct handling, the preparations, the maintenance
and the proper use of the hedgetrimmer. Familiarize
V~
Hz
W
min -1
mm
mm
kg
86 dB (A) according to EN 50144
<2,5 m/s according to EN 50144
2
in a technically perfect
HC 560 HC 560 P
230 230
50 50
500 600
3600 2400
560 560
22 22
3,2 3,2
your-self with the machine before the first use and
also have yourself introduced to practical use of the
machine.
3. Application
The machine is only intended for trimming hedges.
Use for any other purpose constitutes inappropriate
use. The manufacturer / supplier is not liable for any
injury and/or damage arising from inappropriate use.
This risk is the sole responsibility of the user.
Appropriate use of the machine also includes adher-
ence to the operating instructions and compliance with
the servicing and maintenance instructions.
Always keep the instruction manual close at hand
during operation!
4. Safety instruction
1. Always disconnect the plug from the mains
socket before carrying out any work on the
equipment, before cleaning and before moving
the equipment.
2. The use of hedge trimmers involves certain risks.
Attention: Danger! Rotating machinery.
3. The hedge trimmer should always be held with
both hands.
4. Before using the equipment clear the working
area of any foreign objects and be aware of
foreign objects during operation of the machine!
If the machine becomes jammed e.g. by thick
branches, switch off and disconnect the machine
from the mains socket before investigating and
rectifying the cause of the jam. Take special care
when switching the machine on again.
5. Check the flex and all connections for any visible
faults before using the machine (plug discon-
nected). Do not use a faulty flex.
6. Keep the flex away from the cutting area.
7. Do not use the trimmer in wet weather and do not
use it to cut wet hedges.Do not wash down the
device with water. Do not use any high-pressure
cleaning devices or steam jet devices for cleaning.
8. Carry the trimmer by the handles provided and
keep hands away from the cutting blades.
GB-1
ENGLISH
HC 610
230
50
600
2400
600
27
3,6