Displaying The Radio Pass Data; Optical Indication For Extra Security; Care Of Your Keycard; Switching The Audio Source - Blaupunkt SYDNEY Sydney RCM 126 Operating Instructions Manual

Displaying the radio pass data

Using the "Blau" KeyCard supplied with your
set you can have the radio pass data such
as the model name, product number (7 6 . ..)
and serial number indicated on the display
panel.
Please refer to chapter "DSC programming
READ KC".
Optical indication for extra
security
Blinking KeyCard tongue
When the vehicle is stationary and the Key-
Card removed, the KeyCard tongue can be
switched to blink for extra anti-theft secu-
rity.
For this it is necessary that the positive pow-
er supply line and the permanent +12 V lead
are connected such as described in the in-
stallation instructions.
Be sure that "LED ON" is adjusted in the
DSC mode.
If required, please refer to chapter "DSC
programming - LED".

Radio operation with RDS

System or RDS signals. RDS is a second-
ary signal used by many FM radio stations
to broadcast additional information. Blau-
punkt has been a key player in developing
RDS in Europe.
This radio's RDS features include program
service name (PS), which automatically dis-
plays RDS station's identification such as
WNYC-FM or THE WAVE. Other RDS fea-
tures included are alternative frequency
switching (AF), program type identification
and search (PTY), and capability to receive
future Emergency Alert System (EAS) mes-
sage broadcasted by RDS stations. All are
explained in this section.

AF - Alternative frequency

The AF (Alternative Frequency) function
makes sure that the strongest frequency of
the currently selected program is always
tuned in automatically.
This function is activated when "AF" appears
in the display.
In order to switch this function on or off,
AF
press the button briefly.
l
While searching for the strongest reception
signal, the radio may switch to mute briefly.
If "SEARCH" appears in the display when
switching on the radio or recalling one of the
14
Turning off the blinking LED
When you insert your KeyCard, the LED is
automatically turned off until the card is re-
moved and the ignition turned off, assum-
ing the unit is connected as described in the
installation instructions.
If you do not want the tongue to blink at any
time, simply access "LED" in the DSC menu,
and press c< or >> to turn in off.

Care of your KeyCard

For a proper function of the KeyCard it is
important that the contacts are free from any
foreign particles. Avoid direct skin contact.
If necessary, clean the KeyCard contacts
using a cotton swab soaked with alcohol.
(Radio Data System)
stored frequencies, the unit is automatically
searching for an alternative frequency.
"SEARCH" will disappear from the display
when the alternative frequency has been
found or after the frequency band has been
run through completely.
If the reception quality of the selected pro-
gram becomes too bad:
Tune into another station.
l

Selecting a waveband

With this car radio you can select between
the following wavebands:
FM 87.5 - 107.9 MHz
Select the desired waveband by press-
l
FMT AMT
or button.
ing the

Station tuning

Automatic (seek) tuning

Press the car radio will automatj-
A/V;
l
When keeping the upper or lower part A/V
of the rocker switch depressed, seek tuning
will speed up in upwards or downwards di-

Switching the audio source

Using the SRC button you can switch be-
tween the following audio sources:
radio,
tape,
changer (optional), or AUX
Tape operation is only available if a cassette
is inserted.
AUX is only available if no Blaupunkt chang-
er CDC A05 or CDC A 071 is connected.
"AUX ON" must be activated in the DSC
menu.
To switch to another source,
press SRC briefly.
l
tuning
Seek
v
D o w n
Manual tuning with c< >>
You can also tune in a station manually.
Condition:
AF and PTY must be switched off (i.e. the
symbols do not light up in the display).
If necessary, deactivate these functions:
A/V
Press iF or
l
Manual tuning:
Press c< >>; the frequency will change
l
in short intervals in downwards or up-
wards direction.
When holding the right or left part of the rock-
er switch down, the frequency movement is
speeded up.
PTY.