Removing The Heat Pump Module - Dimplex SIW 6TES Installation And Operating Instruction

SIW 6TES - SIW 11TES English

5.3 Removing the heat pump module

Removing the heat pump module enables to heat pump to be
transported easily in a horizontal position and the heat pump
module to be transported separately.
2x
1.
3.
ATTENTION!
In installed and dismantled state, the heat pump module may
only be tilted by a maximum of 45° (in each direction).
After transportation, the transport fastening on the heat pump
module is to be removed from both sides.
ATTENTION!
Before start-up, the transport fastening must be removed.
www.gdts.one 452236.66.09 · FD 9912 EN-7