Lock Your Computer; Unlock Your Computer; Boot-Up Function - Transcend T.sonic 520 User Manual

3. In this window you can Enable the PC-Lock function, change the Screen Saver
Message and the PC-Unlock Timer.

Lock Your Computer

After the PC-Lock function is enabled, your computer will be locked whenever you remove
your T.sonic™ 520. If your computer is locked, the screen will display the locked status as
shown below.

Unlock Your Computer

To unlock your computer, you must re-insert your T.sonic™ 520. The locked status on the
screen will disappear and you are now free to use your computer. The computer's locked
status will also be relinquished automatically after the lock time has expired.

Boot-Up Function

T.sonic™ 520 can be configured to serve as an MS-DOS Boot Disk. Upon completion of this
procedure, the T.sonic™ 520 can be used to boot-up your computer, allowing you to run MS-DOS
programs. This does not make the T.sonic™ 520 a Rescue Disk for Windows, nor does it put
Windows Startup files onto your T.sonic™ 520. After booting with T.sonic™ 520, if you wish to
enter Windows, you must start Windows from your hard drive, or a previously created Rescue Disk.
To use the Boot-Up function, you must log in to the Windows OS with Administrator rights.
24