IBM 5280 User's Setup Manual page 145

138
78. Continue with the following steps if you have magnetic stripe
readers on your system.
If you do not have magnetic stripe readers, go to step 90.
79. Ensure that the verification diskette is in diskette drive 4000.
so.
Move to a data station that has a Magnetic Stripe Reader
attached and do the following:
a. Key TKBD after the words Program name.
b. Press the Field+ or Field Exit key.
c. Key 4000 after the words Device address.
d. Press the Enter key.
81. Observe this display.
Workstation test.
2.
Magnetic stripe reader
option:
.. _ Pn?s.S" ENTER
52-01
J
82. Press the number 2, then press the Enter key.
Observe this display.
Magnetic stripe reader test
Run card through reader
t
52-04
J