IBM 5280 User's Setup Manual page 131

124
54.
Observe the following:
This display will appear for approximately two minutes.
TPRNT
in process.
The printer will start printing a test pattern. Compare this test pattern to the
following test pattern illustration.
H 1. If the top line of the display starts blinking, press the
Reset or Error Reset key. The following display will
appear:
Dp t i
OriS'
a
1" (.:.)
:1. ,.
F~fP.S t
i:)
r'
t
~!.. Ex i t
~:;;4"··""i"9
l~
_ _ _ _
H2. Press the number 1, then press the Enter key. Repeat
steps 52 through 54. If the top line of the display starts
blinking again, record the four-digit error code number
for reference and call your service representative.
H3. If the printed test pattern does not compare to the
following test pattern illustration for your printer,
call your service representative.