IBM 5280 User's Setup Manual page 119

112
20. Press the number 2, then press the Enter key.
The program load screen will be displayed.
21. Make a check mark in the box
I!I
below indicating
completion of step 15 through step 20 for this keyboard.
Keyboard Steps 15-20
Number Completed
0
0
0
2
0
3
0
You can have a maximum of four keyboards on your system.
If you have not completed step 15 through 21 for each keyboard, go to
step 22.
If you have completed step 15 through step 21 for each keyboard, go to
the progress check block and continue to the next step.
22. Move to the next higher numbered keyboard and do the
following:
a. Make sure that the verification diskette is in diskette drive 4000.
b. Key TKBD after the words Program name.
c. Press the Field+ or Field Exit key.
d. Key 4000 after the words Device address.
e. Press the Enter key. Go to step 15.
PROGRESS CHECK
1. You should have keyed a 2 and a Z at each keyboard on your system.
2. You should have keyed the characters ABC .•. XYZ and 012 ... 789 at
each keyboard on your system.