Blaupunkt TORONTO RDM 126 Operating Instructions Manual page 8

CDC operation (optional)
To switch between the name, time
(playback time) and number (CD
number) display modes:
Press AF briefly.
> PTY (Programme Type)
In the PTY mode, the preset buttons
become programme type buttons.
With each preset you can select one
programme type, such as for example
NEWS, SPORT, POP MUSIC,
EDUCATE, etc.
?
• SRC
SRC (source)
When having a CD inserted you can
switch between the different audio
sources radio, CD, and CDC/AUX (if
activated).
(Eject)
Hold down the button for approximate-
ly two seconds (beep) and the CD will
eject.
@ 1, 2, 3, 4, 5, 6 - preset buttons
On FM, you can store six stations for
each of the memory banks I, II and T.
On MW/LW, you can store six stations
each.
To store a station: Press a preset
button during radio operation and hold
down until the set resumes play after
the muting and you hear a beep.
To recall a station: Select the desired
waveband. On FM, adjust the corre-
sponding memory bank and press the
relevant preset button briefly.
Extra function preset buttons
To store and recall a PTY programme
type.
On FM, you can store and recall one
programme type on/from each preset
button when PTY is active ("PTY"
lights up in the display).
A CD slot
When inserting a disc with the label
side facing up, it will be pulled in auto-
matically and transported to the play-
back position. CD playback is adjusted
automatically.
B DSC (Direct Software Control)
Use the DSC function to customise
certain programmable, basic settings
to suit your personal needs and prefer-
ences. See chapter "DSC program-
ming" for more information.
35