Setting Or Resetting Filter Indication Timer - Trane XT500C Owner's Manual

Setting or Resetting Filter Indication Timer

Your thermostat comes preset to the 30-day setting. To change this setting, or reset after filter expiration, follow
these instructions:
1. Press Filter to enter the Filter mode.
Filter
2. Press and hold Filter for at least
Filter
3 seconds to reset fan run time to
zero.
In this example, current fan run time is 5 days and the filter is set to expire in 30 days.
27
Days
Pressing the Filter key displays filter information.
Days
Holding down the Filter key resets counter to "0" days.
Setting
Filter
M17048
Setting
Filter
M17049
Pub. No. 22-5128-02
69-1216