Constant Temperature
Setting
Set Program
Setpoint Programming
AM
Unlike the first two options, Constant Temperature
Mon
Heat
Setpoint Programming does not have the Wake, Leave,
Return and Sleep periods. The temperature is set by
System
Fan
Auto
pressing the
and
keys.
Heat
M12960
The four periods (for example, Wake) are absent from the display in this mode.
Setting Temperature and Fan Operation
If your thermostat is set for Constant Temperature Setpoint Programming, follow the steps below. Otherwise,
refer to 7-Day Program and Operation, or 24-Hour Program and Operation.
To set the temperature and fan operation:
NOTE: Refer to the section Setting Current Day and Time to set the current day and time, and the section
Setting System and Fan to set the system and fan.
Pub. No. 22-5128-02
57
69-1216