Trane R Series Installation Operation & Maintenance page 72

RTAC-SVX002A-EN
Controls Interface
Refrigerant Screen
The refrigerant screen displays those aspects of the chiller related to the refrigerant
circuits.
All pressures are displayed to 0.1 psig or 1 kPa.
Condenser Refrigerant
Circuit 1 and 2
DynaView always displays all pressures
(English or SI) as gauge pressures. The
correct setting of the local atmospheric
pressure is necessary for accurate
gauge display.
Condenser Refrigerant Temperature
Circuit 1 and 2
The main processor will calculate and
display a saturated temperature based
on the respective pressure read.
Evaporator Refrigerant
Circuit 1 and 2
DynaView always displays all pressures
(English or SI) as gauge pressures. The
correct setting of the local atmospheric
pressure is necessary for accurate
gauge display.
Pressure Evaporator Refrigerant Temperature
Circuit 1 and 2
The main processor will calculate and
display a saturated temperature based
on the respective pressure read.
Evaporator Approach Temperature
Circuit 1 and 2
The approach temperature is calculated
from the leaving water temperature
minus the
temperature for the respective circuit.
Refrigerant Liquid Level Circuit 1
Pressure and 2 (only available on software
revisions 18.0 or later)
saturated evaporator
72