Table of Contents
Advertisement
window that appears. An example is shown in the following figure:
3)
Click on Properties. The following TCP/IP Properties window will display and
the IP Address tab is open on this window by default.
4)
Now you have two ways to configure the TCP/IP protocol below:
•
Assigned by DHCP Sever
a.
Select Obtain an IP address automatically, as shown in the figure below:
b.
Do not type anything into the New gateway field on the Gateway tab.
TL-R460
Figure B-3 Configuration tab
Figure B-4 IP Address tab
- 47 -
Cable/DSL Router User Guide
Advertisement
Table of Contents
