Table of Contents
Advertisement
ACCESSORIES
(Must be purchased separately)
GROUND WIRE 208-950
25' (7.6 m) long
and CLAMP 103-538
AIR FILTER 106-148
250 psi (17.5 bar) MAXIMUM WORKING PRESSURE
Separates harmful moisture and contaminants from the
compressed air supply. (See Manual 308-169).
1/2" npt (fbe)
AIR SHUT-OFF VALVE 103-344
500 psi (35 bar) MAXIMUM WORKING PRESSURE
Bleed type valve for shutting off main air supply to spray
system. 3/4" size.
AIR DRYER KIT 217-341
150 psi (0.49 bar) MAXIMUM AIR INLET WORKING
PRESSURE
Provides clean, dry air to two supply drums of
polyurethane foam chemicals to prevent crystallization of
isocyanate and Freon loss in Resin. (See manual 307-
548).
1. To be sure you receive the correct replacement parts, kit or
accessories, always give all of the information requested in the
chart below.
2. Check the parts list to identify the correct part number; do not
use the ref. no. when ordering.
3. Order all parts from your nearest Graco distributor.
6 digit
PART
NUMBER
HOW TO ORDER REPLACEMENT PARTS
QTY
1:1 RATIO FEED PUMPS 226-946
1:1 RATIO FEED PUMP KIT 217-381
180 psi (12 bar) MAXIMUM WORKING PRESSURE
These feed pumps, which have an airtight bung adapter,
supply polyurethane foam chemicals from supply
containers to proportioning pumps. The Feed Pump Kit
includes an Air Dryer 217-394, two feed hoses, three air
hoses and related fittings. (See manual 307-552).
ISO PUMP OIL
Helps protect displacement pump throat packings
217-374 1 pint (0.47 liter)
(See manual 307-767)
218-656 1 gallon (3.8 liter)
(See manual 307-767)
HOSE ABRASION COVER 070-411
Protects heated hose from damage caused by rough
surfaces.
Specify length needed times 1.125 when
ordering.
AIR REGULATOR and GAUGE 206-199
(See manual 308-768 for air regulator only)
300 psi (21 bar) MAXIMUM WORKING PRESSURE
10-125 psi (1-9 bar) REGULATED PRESSURE RANGE
1/2" npt (f) inlet and outlet.
PART DESCRIPTION
684-027 18
Advertisement
Table of Contents
