Technical Data; How To Order Replacement Parts - Graco 218-026 Instructions-Parts List Manual

TECHNICAL DATA

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gun Length . . . . . . . . . . . . . . . . . . . . .
Maximum Working Pressure
Air Pressure Operating Range:
Fluid Pressure Operating Range:
Voltage Operating Range
Paint Resistivity Range . . . .
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wetted Parts . . . . . . Stainless
Nylon, Acetal, Viton PTFE,
Delrin
Viton and Delrin are registered trademarks of
the DuPont Co.
Loctite is a registered trademark of the Loctite
Corporation.

HOW TO ORDER REPLACEMENT PARTS

1. To be sure you receive the correct replacement
parts, kits or accessories, always give all of the
information requested in the chart below.
2. Check the parts list to identify the correct part
number; do not use the ref. no. when ordering.
3. Order all parts from nearest Graco distributor.
6 digit
Part
Number Qty
0.87 Kg (1.90 lb)
310 mm (12.25 in.)
. . . . . . . . . . 7 bar (100 psi)
0–7 bar (0–100 psi)
0–7 bar (0–100 psi)
. . . . . . . . . . . . . . . . . . 0–75 KV
7 megohm cms to infinity
1/4 npsm(m) L.H.
3/8 npsm(m)
Steel, Polyethylene,
Part Description
SERVICE INFORMATION
Listed below by assembly changed are OLD and NEW
parts.
Assembly
Changed Status
218–026 ADDED
Spray Gun OLD
NEW
INTERCHANGEABILITY NOTE: NEW parts replace
OLD parts listed directly above them.
MISCELLANEOUS NOTES: Revised the manual to
update the gun handle drawings.
Ref
No. Part No. Name
18b 186–127 Cushion
43 181–183 Trigger
43 186–473 Trigger