How To Order Replacement Parts - Graco FOAM-CAT 200 Instructions-Parts List Manual

ACCESSORIES
(Must be purchased separately)
WIRE
25 ft (7.6
and CLAMP 103438
- - - - - -
AIR FILTER
250 psi (17.5 bar) MAXIMUM WORKING PRESSURE
Separates harmful moisture and contaminants from the ( :
compressed air supply.
AIR SHUTOFF VALVE 103-344
Bleed type valve for shutting off main air supply to spray
system. 3/4 in. size.
AIR DRYER KIT 217-341
PRESSURE
Provides clean, dry air to two supply drums of
polyurethane foam chemicals to prevent crystalization
of lsocyanate and Freon loss in Resin. See manual
307-542

HOW TO ORDER REPLACEMENT PARTS

1. To be sure you receive the correct replacement parts,
kit or accessories, always give all of the information
requested in the chart below.
2. Check the parts list to identify the correct part number;
do not use the ref. no. when ordering.
3. Order all parts from your nearest Grace distributor.
6 digit
PART
N U M B E R I
1:1 RATIO FEED PUMP KIT 217-381
psi (72 bar) MAXIMUM WORKING PRESSURE
These feed pumps, which have an airtight bung
adapter, supply polyurethane foam chemicals from sup-
ply containers to proportioning pumps. The Feed Pump
Kit includes an Air Dryer 217384, two feed hoses, three
air hoses and related fittings. See manual 307552.
Helps protect displacement pump throat packings.
217-374 1 pint (0.47 liter)
HOSE ABRASION COVER 070411
Protects heated hose from damage caused by rough
surfaces. Specify length needed times 1.125 when
ordering.
AIR REGULATOR and GAUGE 206499
inlet and outlet