Maintenance; Periodic Maintenance Schedule - Husqvarna Wacker Neuson CRT60-74LX Operator's Manual

Maintenance

6 Maintenance
6.1

Periodic Maintenance Schedule

The table below lists basic machine maintenance. Tasks designated with check
marks
points  require special training and equipment.
Grease trowel arms.
Check hydraulic oil level.
Inspect air filter.
Check external hardware.
Pressure wash all surfaces until free of concrete.
Check for leaks around hydraulic hoses and
connections.
Lubricate wheel kit hydraulic cylinder.
Check wiring and electrical connections.
Grease steering pivots.
Drain water from fuel/water separator.
Check for leaks around radiator hoses and hose
clamps.
Check condition of intake air line.
Clean air cleaner element.
Remove sediment in fuel tank.
Clean radiator filler cap.
Replace hydraulic oil filter.
3, 4
Replace hydraulic oil.
Replace fuel line hose.
Replace air cleaner element.
Change radiator coolant.
1
2
3
4

may be performed by the operator. Tasks designated with square bullet
1
2, 3, 4
1
Service more often in dusty conditions.
Perform initially after first 50 hours of operation. Hydraulic oil filter is included with machine.
In hot climates exceeding 32°C (90°F), replace fluid and filter every 250 hours.
In climates below 32°C (90°F), replace fluid and filter every 500 hours.
Every Every
Daily 50 100
hours hours










Every year
Every 2 years
60
CRT60-74LX
Every Every Every
250 500 1000
hours hours hours





 
 



wc_tx004561gb.fm