Repair function
Any wiring fault on the system must be rectified by an
engineer from the servicing organisation, see log book
for contact details. A wiring fault will require correction
to the wiring followed by running a repair command at
the main panel.
"
The following procedure
assumes access is by customer using
level 2 password.
a.
Press the MENU ON/OFF key.
b.
Press the F1 button to select [Test/Engl].
c.
Press the F4 button to select [UserCode].
Notice a flashing cursor and a message on the
display 'Enter access code'. Use the keyboard
to input your password and then press the Enter
button.
d.
Press the F1 button to select [Loop]. Notice
'Loop' followed by a flashing cursor on the
display. Use the keypad to input a loop number
or range (1-8).
e.
Press the F1 button to select [Repair] and then
the F2 button to select [Enter].
Vigilon
COMPACT VOICE ALARM
41