Honeywell Gent Vigilon Compact Operating Instructions Manual page 10

Operating instructions
VA Indications
n
(green) (red)
All Zones
(green)
Clear Zones
10
Voice Alarm Zones
1 2 3
6 7 8
All Zones
Speak Now
Auxiliary messages
1 TEST START
TEST END
2
STAND DOWN
3
Pressing one or more of the 10 buttons selects the local Voice
Alarm Zone(s) of the local system to which emergency or auxiliary
messages, or emergency microphone is to be announced. The two
LEDs beneath flash alternately to show the Voice Alarm Zone has
been selected.
On selecting the required emergency or auxiliary message only one
of these LEDs changes to steady or flashing indication determined
by the type of audio to be outputted to the selected Voice Alarm
Zones. The left LED indicates auxiliary message selection while the
right LED indicates emergency message selection.
Pressing the 'All Zones' button allows quick selection of all Voice
Alarm Zones of the local system. The accompanying LED gives a
steady indication when the button is pressed. Note all the Voice
Alarm Zones that have been setup in your system will give a
flashing indication and those not set up will give no indication.
Pressing 'Clear Zones' button will clear selected Voice Alarm Zones
of the local system and stop announcements.
4 5
9
10
Clear Zones
VA Activated
Emergency messages
ALERT 1
EVACUATE
2
BOMB
3