Honeywell Gent Vigilon Compact Operating Instructions Manual page 8

Operating instructions
Indicators and controls
Display
Zones 1
(red)
Power
(green)
Fire
(red)
Verify
(amber)
Fault
(amber)
System Fault
(amber)
Disablement
(amber)
CB253 or CB254
(amber)
Power Fault
(amber)
Sounder
(amber)
Delay
(amber)
Test
(amber)
Menu On/Off
to
F1 F4
Cancel Buzzer
Next
8
Descriptions
The Display provides messages of the system status / events by
means of 8 lines by 40 characters per line display.
Hidden-until-lit fire zone indicators. When the "Zones" text and
number(s) are illuminated it indicates that a FIRE has been detected
in the specified zone(s) of the local system.
When illuminated it indicates that a supply to the panel is present.
When illuminated it indicates that a FIRE has been detected in the
protected premises.
When illuminated it indicates that the Verify button has been
pressed and the alarm sounders in the system are delayed from
sounding.
When illuminated it indicates that a FAULT has been detected in
the fire detection and alarm system or in the audio system.
When illuminated it indicates that a fault has occurred with the
system processor. It is important to investigate this fault because
the fire alarm system may not be able to detect fires.
When illuminated it indicates that a part of the system has been
disabled.
When illuminated it indicates a command build 253 or 254 has been
activated.
When illuminated it indicates the battery or mains supply to the
panel has failed.
When illuminated (always with either the FAULT light or the
DISABLEMENT light) it indicates that there is a sounder fault
(flashing indication) or sounder disablement (steady indication).
When illuminated it indicates that one or more delay blocks are
setup on the panel.
When illuminated it indicates one or more local zones are in Test
mode.
Pressing Menu On/Off enables/disables the on screen menu facility
which gives access to the system menus.
The 'Fn' buttons are used to select functions and sub-functions of
the system menus, which appear on the display. Each option of the
menus, correspond to one of the function button and pressing a
button will select the option..
The Cancel Buzzer button when pressed will stop the internal panel
buzzer from sounding.
Note the local buzzer is automatically silenced when the emergency
microphone is being used to announce live speech.