Table of Contents
Advertisement
g.
If a DriveLock password is set, select the Security menu, and scroll down to Hard Drive Utilities
under the Utilities menu. Select Hard Drive Utilities, select DriveLock, and then clear the check
box for DriveLock password on restart. Select OK to proceed.
h.
Select the Exit menu, and then select Load Setup Defaults. Click Yes at the warning message.
The computer reboots.
i.
During the reboot, press
at the bottom of the screen.
NOTE:
j.
Select the Exit menu, select Load Setup Defaults.
k.
Reboot the system. If the system has a Trusted Platform Module (TPM) and/or fingerprint reader,
one or two prompts appear—one to clear the TPM and the other to Reset Fingerprint Sensor; press
or tap
l.
Remove all power and system batteries for at least 24 hours.
2.
Complete one of the following:
●
Remove and retain the storage drive.
– or –
Clear the drive contents by using a third party utility designed to erase data from an SSD.
●
84
Chapter 11 Statement of memory volatility
esc
while the "Press the ESC key for Startup Menu" message is displayed
If the system has a BIOS administrator password, enter the password at the prompt.
F1
to accept or
F2
to reject.
- Quick Links:
- Preparation for Disassembly
- Display
- Memory
Hide quick links:
Advertisement
Table of Contents
